Overview:

Available as an industry first is the ICON Jeep JK 1.75 – 4” bolt-on Stage 2 coilover conversion system w/CDCV. This system not only offers superior ride quality and performance, but gives you the option to adjust ride height and compression valving based on how your vehicle is equipped. Included in this system is fabricated front coilover upper & lower mounts, rear upper subframe & lower axle mounts, reservoir mount, 2.0 V.S. Series remote reservoir coilovers w/CDCV, front and rear adjustable track bars, front and rear link arms, and necessary hardware for proper installation. This ICON system was designed from the ground up for improved suspension handling off road, increased wheel travel over stock, and the best ride quality on the market. The adjustable track bar with FK bearings not only improves rigidity over flexible factory joints, but offers adjustability to center the axles under the Jeep. ICON 2.0 V.S. Series shocks include FK bearings, billet top cap & rod ends, 7/8" shafts, all while increasing the duration of consistent damping over stock regardless of situation. Adjustable ride height, compression damping tuneablility with the turn of an external knob, and secondary spring rate engagement adjustability by the end user makes this kit highly tunable to your personal liking by all skill levels. The ICON JK hydraulic bumpstop kit (22019) is also an option that can be installed with the coilover conversion kit adding wheel control for high speed traversing.

Key Features:

• 100% Returnable to stock

• Adjustable ride height from 1.75-4" lift

• Adjustable secondary spring rate engagement

• Adjustable track bars with PTFE lined FK bearings

• Upgraded tubular steel link arms with adjustability front and rear

• Increased wheel travel over stock

• Vehicle specific tuned shocks w/CDCV to easily adjust compression damping

• Shock geometry improves stability

• Sheet metal front shock mount for maximum clearance & clean look

• Lifetime guarantee that coil springs won’t sag

Tech Info:

• Fits Jeep Wrangler JK Models

• Lift heights are based on 4 door models, lighter 2 Door Models or heavily assessorized vehicles will vary.

• High clearance steering ok with proper bumpstop installed (not included)

• Requires aftermarket exhaust that dumps before the rear axle.

• 2012+ models require exhaust extension kit (Part #22011) for proper front driveline clearance

• No driveline modifications necessary if kit is installed as intended (with or without track bars)

• Compatible with ICON front hydraulic bump stop system (Part #22019)

• Front End Alignment Recommended

Wheel & Tire Fitment Info:

OEM Wheels & Tires: Yes

Aftermarket Wheels: 4.5" Backspace
(wheel spacers required to run factory wheels with an oversized tire)

Aftermarket Tires: 33” Tall tires.
(35" tire packages require aftermarket high clearance fenders & minor modifications, test fitment recommended)

System Components Included:

22003 (QTY.1) ; Front coilover upper & lower mounts

22004 (QTY.1) ; Rear coilover upper & lower mounts, reservoir mount

28006C (QTY.1) ; ICON 2.0 V.S. Series front dual rate coilover shocks with reservoir and CDCV (Pair)

28007C (QTY.1) ; ICON 2.0 V.S. Series rear dual rate coilover shocks with reservoir and CDCV (Pair)

21020 (QTY.1) ; Jeep JK Front Adjustable Pan Rod Bar Kit         

21025 (QTY.1) ; Jeep JK Rear Adjustable Pan Rod Bar Kit

21031 (QTY.1) ; Jeep JK Front Lower Fixed Link Kit

21036 (QTY.1) ; Jeep JK Front Upper Adjustable Link Kit

21041 (QTY.1) ; Jeep JK Rear Lower Adjustable Link Kit

21046 (QTY.1) ; Jeep JK Rear Upper Fixed Link Kit

Options:

22011 Jeep JK Exhaust Extension Kit

22012 Jeep JK Alignment Cam and Knock out Tool Kit

22013 Jeep JK Alignment Cam Kit (Fits in Front Lower or Rear Upper Link position)

22014 Jeep JK Replacement Front Drive Shaft w/ Yoke Adapter (2012 - Current)

22016 Jeep JK Replacement Front Drive Shaft w/ Yoke Adapter (2007 - 2011)

22017 Jeep JK Alignment Cam Knock out Tool

22018 Jeep JK High-Clearance Steering Stabilizer Kit

22019 Jeep JK Front Hydraulic Bumpstop System